SURFACE PRIMER VALLEJO 17ml.

SURFACE PRIMER VALLEJO In order to guarantee excellent adhesion it is necessary to apply it on a previously "degreased" surface, therefore it is advisable to wash the model or figure before priming in order to remove the remains of release agents. The primers are applied in successive layers and dry quickly, forming a homogeneous film of extraordinary hardness and resistance a few hours after application. They can be used directly or thinned with our Airbrush Thinner or Flow Improver. Recommended compressor settings for our colours are around 15 - 20 PSI or 0.5 to 1 kg. For proper airbrush maintenance we recommend using Vallejo Airbrush Cleaner.

Surface Primer is non-flammable and does not contain solvents. See information regarding product certifications in the Safety section.